Cyclone Bike version

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[Bad_Scorpion]

Before I used 3d models to make paper models I did work with them as parts to make the whole. But that was due to no resource for 3d modeling it then breaking it down from there. Honestly I would have to say easiest would be to 3d model it then use one of the various apps out there to break it down into individual parts. Much easier as you already know parts fit together. Just a mater of from this point breaking them apart into an relatively easy format to be reassembled in paper/card. Much less guess work. And you can make them much more complex doing it this way than doing so the old school method. Anyway that's my view on it.

As for the handle guard,

Attachment 6509
Attachment 6510
Attachment 6511

The dark colored parts are inside and the reset makeup the outer shell. If needed or if in your build you feel need to drop the internal parts we can do that. But I left them as They gave it a little more strength in my view, but you are building it so let me know.

[xavs]

i love robotech i have some plastic models to compare the parts, i think it take me some time but, if you find this usefull mail me please

[Bad_Scorpion]

Actually if you could position them on white backdrop and take pictures from a 45 degree angle looking down on them and for others looking up front back sides bottom. I person I just met has one of those 3d object converter apps and states he can take the pictures and turn them into models. I can then breakthem down into card format since the only 3d app still working on this pc is pepa. Looks like I've ot a registry issue. Looking to see if I can find the code and fix it but may just get tired of looking and reload windows. But anything like that picture wise would be good. also, do you have an sdf in battle mode or ship mode?

[xavs]

ok i'm going to my parents place and look for them and i´d like to try the paper model

[xavs]

here are some sdf pic's
http://www.cww2.net/bbs/read.php?tid=53099&fpage=1
http://tatooine.fortunecity.com/garg...25/sdf1bw.html
no blue prints but close

[Bad_Scorpion]

sorry pmed you whith what model are you asking about but now seeing this post realized what you meant. will have to send it out tommorow as still cannot send from my home email address as they have put a cap on my outgoing mail as I regularly send large documents. So will have to wait until can send from alternative email address.

[Old Snake]

what happened to this model?
Did you released it?
I really want it, i've been looking around but never could find it till here.
Can you send it to me?
oldiesnake@gmail.com

Cheers