Your a Redneck PaperModeler if:(?)

Gil · 10-04-2005, 09:25 PM

Hi All,

With the RPM(S?) being formed I thought it appropriate to start the Foxworthy Memorial Cardmodel Redneck Appelation Disertation (yeah, the last word doesn't start with a "P"). You guys started the original but it went South with the last site, so here goes again:

You're probably a redneck paper modeler if the word "Budweiser" appears somewhere on your model...,

Best regards, Gil

Bowdenja · 10-04-2005, 09:52 PM

You're probably a redneck paper modeler if:

your knife you use to cut out the parts has Case, Buck or Old Henry on it.

10-04-2005, 10:36 PM

your probably a redneck paper modeler if......

ur magnifying class is the bottom of a clear beer bottle........

laterz

possm_23

(RPM)

dwgannon · 10-04-2005, 10:49 PM

You're probably a redneck paper modeler if...

Your beer can doubles for you glue holder.

Darwin · 10-05-2005, 12:57 AM

You are probably a redneck paper modeller if

you ask Nobi "how do you make a helical coil in Rhino" and "what are the best color values for copper?"

Gil · 10-05-2005, 10:17 AM

You might be a redneck if:

You only select models that are near beer yellow in color so's the splash stains don't show too badly..,

-Gil

shrike · 10-05-2005, 02:00 PM

If you've created cinder block kits to display your car models on

10-05-2005, 02:40 PM

you might be a redneck paper modeler if.....

a topless beer can is your tool holder....

laterz

possm_23

(RPM)

Lepercan · 10-05-2005, 07:05 PM

You incorporate dead grass into your dioramas to hide the dog hair shed on it.
Lepercan

Darwin · 10-05-2005, 08:29 PM

You are without doubt a redneck when the clumps of doghair are your diorama.

10-06-2005, 04:22 AM

you might be a RPM if.......

your idea of a okla quarter is two dimes and a nickle held together with silver duct tape.....

laterz

possm_23

(RPM)

10-06-2005, 04:44 AM

you just mite be a RPM if.......

you have to spell out your initials......

laterz

possm_23

(RPM)

dwgannon · 10-06-2005, 06:31 AM

You might be an RPM....

You use duct tape to laminate two pieces of cardstock....

You use your truck tire to flatten a sheet of card stock....

Maurice · 10-06-2005, 08:04 AM

Sometimes I worry a little about the descendants of the "worthless refuse" - but only sometimes and only a little.

Most times there's better to do.

GEEDUBBYA · 10-06-2005, 09:41 AM

Hahaha Possm,

I saw that spell out your initials remark .

Have a good day,

Greg W. aka GEEDUBBYA (thats GW)

10-04-2005, 09:25 PM	#1 (permalink)
Gil Senior Member Join Date: Jan 2004 Location: Northern Bear Flag Republic Posts: 2,419	Your a Redneck PaperModeler if:(?) Hi All, With the RPM(S?) being formed I thought it appropriate to start the Foxworthy Memorial Cardmodel Redneck Appelation Disertation (yeah, the last word doesn't start with a "P"). You guys started the original but it went South with the last site, so here goes again: You're probably a redneck paper modeler if the word "Budweiser" appears somewhere on your model..., Best regards, Gil __________________ "I got carded"

10-04-2005, 10:49 PM	#4 (permalink)
dwgannon Senior Member Join Date: Feb 2004 Location: Hoffman Estates,IL Posts: 481	You're probably a redneck paper modeler if... Your beer can doubles for you glue holder. __________________ DWG (AKA Dave G) Hoffman Estates, IL (USA) {{ RPM - Redneck Paper Modeler }}

10-05-2005, 12:57 AM	#5 (permalink)
Darwin Senior Member Join Date: Sep 2005 Location: Idaho Falls, ID Posts: 905	You are probably a redneck paper modeller if you ask Nobi "how do you make a helical coil in Rhino" and "what are the best color values for copper?" __________________ Zathrus stay....Zathrus die. Zathrus leave....Zathrus also die. Either way, bad for Zathrus.

10-05-2005, 10:17 AM	#6 (permalink)
Gil Senior Member Join Date: Jan 2004 Location: Northern Bear Flag Republic Posts: 2,419	You might be a redneck if: You only select models that are near beer yellow in color so's the splash stains don't show too badly.., -Gil __________________ "I got carded"

10-05-2005, 02:00 PM	#7 (permalink)
shrike Senior Member Join Date: Jan 2004 Location: Chandler AZ USA Posts: 467	If you've created cinder block kits to display your car models on __________________ Shrike www.ibgmodels.com

10-04-2005, 09:52 PM	#2 (permalink)
Bowdenja Senior Member Join Date: Sep 2005 Location: Ridgeland, MS Posts: 3,218	You're probably a redneck paper modeler if: your knife you use to cut out the parts has Case, Buck or Old Henry on it.

10-04-2005, 10:36 PM	#3 (permalink)
possm_23 Guest Posts: n/a	your probably a redneck paper modeler if...... ur magnifying class is the bottom of a clear beer bottle........ laterz possm_23 (RPM)

10-05-2005, 02:40 PM	#8 (permalink)
possm_23 Guest Posts: n/a	you might be a redneck paper modeler if..... a topless beer can is your tool holder.... laterz possm_23 (RPM)

10-05-2005, 07:05 PM	#9 (permalink)
Lepercan Senior Member Join Date: Jul 2005 Location: Eastern Oklahoma Posts: 107	You might be Redneck Paper Modeler if... You incorporate dead grass into your dioramas to hide the dog hair shed on it. Lepercan __________________ TANSTAAFL! ( There ain't no such thing as a free lunch! ) Lazarus Long AKA Robert A.Heinlein

10-05-2005, 08:29 PM	#10 (permalink)
Darwin Senior Member Join Date: Sep 2005 Location: Idaho Falls, ID Posts: 905	You are without doubt a redneck when the clumps of doghair are your diorama. __________________ Zathrus stay....Zathrus die. Zathrus leave....Zathrus also die. Either way, bad for Zathrus.

10-06-2005, 04:22 AM	#11 (permalink)
possm_23 Guest Posts: n/a	you might be a RPM if....... your idea of a okla quarter is two dimes and a nickle held together with silver duct tape..... laterz possm_23 (RPM)

10-06-2005, 04:44 AM	#12 (permalink)
possm_23 Guest Posts: n/a	you just mite be a RPM if....... you have to spell out your initials...... laterz possm_23 (RPM)

10-06-2005, 06:31 AM	#13 (permalink)
dwgannon Senior Member Join Date: Feb 2004 Location: Hoffman Estates,IL Posts: 481	You might be an RPM.... You use duct tape to laminate two pieces of cardstock.... You use your truck tire to flatten a sheet of card stock.... __________________ DWG (AKA Dave G) Hoffman Estates, IL (USA) {{ RPM - Redneck Paper Modeler }}

10-06-2005, 08:04 AM	#14 (permalink)
Maurice Senior Member Join Date: Jan 2004 Posts: 611	Sometimes I worry a little about the descendants of the "worthless refuse" - but only sometimes and only a little. Most times there's better to do.

10-06-2005, 09:41 AM	#15 (permalink)
GEEDUBBYA Senior Member Join Date: Sep 2005 Location: PINE BLUFF, ARKANSAS Posts: 1,047	*Hahaha Possm,* *I saw that spell out your initials remark .* *Have a good day,* *Greg W. aka GEEDUBBYA (thats GW)* __________________ *I've got duel citizenship, here and at http://www.scale-models.co.uk/ .*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do you Have Redneck Mentality?	possm_23	North America	11	12-04-2006 03:17 AM
Redneck Cat Carrier!	Rusty Stumps	General Talk	14	12-11-2002 11:07 AM