what u say about this?

yaniv · 10-10-2007, 02:09 AM

look at the link

YouTube - Craft ROBO Cuts 3-D Models from Card Stock

i'm in love

**jaffro** · 10-10-2007, 02:56 AM

if I had a spare $620AU on me right now, I would have placed an order for one before typing this post

**Lex** · 10-10-2007, 09:18 AM

I second jaffro......

SCEtoAux · 10-10-2007, 11:45 AM

There is a Pepakura viewer for that thing too.
Pepakura Designer
Click the Download link on the left.

**Padre** · 10-10-2007, 12:24 PM

Question is......how would it do on a ship model, airplane model and how small a piece does it cut? Looks like it works only on large simple models.

Ron Caudillo · 10-10-2007, 12:27 PM

Hi all,
This demonstration was very interesting!

Anyone know where I can get the turtle that is shown in the demo? I have always liked turtles and would really love to build one!

Thanks for any information!

Best Regards,
Ron Caudillo

dansls1 · 10-10-2007, 12:52 PM

Quote:

Originally Posted by Ron Caudillo

Hi all,
This demonstration was very interesting!

Anyone know where I can get the turtle that is shown in the demo? I have always liked turtles and would really love to build one!

Thanks for any information!

Best Regards,
Ron Caudillo

Not the one in the video, but do you have this one?

yaniv · 10-10-2007, 01:25 PM

i also love turtle

i have 2 sey tutle :P

dansls1 · 10-10-2007, 01:29 PM

I love otters, if you look at all the animals on the yamaha site there's an otter there is how I found it in the first place

DarthPineapple · 10-10-2007, 01:42 PM

Quote:

Originally Posted by SCEtoAux

There is a Pepakura viewer for that thing too.
Pepakura Designer
Click the Download link on the left.

I believe the vid is all about the cutting machine, not the paper model viewer :P

But that is awesome! I would love to have one!

smyfe · 10-10-2007, 01:57 PM

A mere £209 on e-bay with free p+p in the UK, time to start saving the pennies I think

smyfe · 10-10-2007, 01:59 PM

If anyone is interested
Craft Robo Vinyl / Die Cutter with 2 Year Warranty - eBay Die-Cutters Punches, Cardmaking Scrapbooking, Crafts (end time 11-Oct-07 19:36:23 BST)

MOS95B · 10-10-2007, 02:21 PM

Wish I could afford that. (Translation: I wish I could talk The Missus into letting me get that)

sakrison · 10-11-2007, 12:44 AM

I don't know, maybe I should just hire somebody to build the models for me.

Seriously, it doesn't appeal to me. Cutting out parts is part of the fun, part of the challenge, part of the relaxation of paper modeling. That's not to say my attitude is better or purer or more or less anything than anybody else's. It's just my opinion. For myself, I can't see spending $600 to eliminate what is for me part of the fun and the challenge.

"Every dog to his own fleas." I'll pass on this one.

No worries,
--David

yaniv · 10-11-2007, 12:50 AM

its work with any kind of digital model?

10-10-2007, 02:09 AM	#1 (permalink)
yaniv Senior Member Join Date: Nov 2004 Posts: 1,337	what u say about this? look at the link YouTube - Craft ROBO Cuts 3-D Models from Card Stock i'm in love __________________ Visit my Site --> http://www.cm-contest.land.ru/ visit my project c-47 --> http://forum.zealot.com/t146945/ kooklik sub --> http://forum.zealot.com/t146581/?highlight=kooklik

10-10-2007, 09:18 AM	#3 (permalink)
Lex Dollmaker Card Models Moderator Join Date: Dec 2006 Location: Beijing -- 1400m from the Olympic Stadium! Posts: 2,243	I second jaffro...... __________________ Secret project under way... Recent works: Hanzel/Gretel, De Havilland Comet-4B, F-25, Meirin and the White Knight

10-10-2007, 11:45 AM	#4 (permalink)
SCEtoAux Senior Member Join Date: Jul 2004 Location: USA Posts: 717	There is a Pepakura viewer for that thing too. Pepakura Designer Click the Download link on the left. __________________ ~Doug~ AC006299 Project Gutenberg

10-10-2007, 12:27 PM	#6 (permalink)
Ron Caudillo Senior Member Join Date: Feb 2004 Location: Saddle Brook, New Jersey Posts: 135	Nice demo, where can I get the turtle? Hi all, This demonstration was very interesting! Anyone know where I can get the turtle that is shown in the demo? I have always liked turtles and would really love to build one! Thanks for any information! Best Regards, Ron Caudillo __________________ Ron Caudillo ronaldcaudillo@yahoo.com

10-10-2007, 01:25 PM	#8 (permalink)
yaniv Senior Member Join Date: Nov 2004 Posts: 1,337	i also love turtle i have 2 sey tutle :P __________________ Visit my Site --> http://www.cm-contest.land.ru/ visit my project c-47 --> http://forum.zealot.com/t146945/ kooklik sub --> http://forum.zealot.com/t146581/?highlight=kooklik

10-10-2007, 02:56 AM	#2 (permalink)
jaffro Card Modelerator Card Models Moderator Join Date: Jun 2007 Location: Melbourne, Australia Posts: 723	if I had a spare $620AU on me right now, I would have placed an order for one before typing this post

10-10-2007, 12:24 PM	#5 (permalink)
Padre Card Models Moderator Card Models Moderator Join Date: Dec 2006 Location: Arizona Posts: 263	Question is......how would it do on a ship model, airplane model and how small a piece does it cut? Looks like it works only on large simple models.

10-10-2007, 01:29 PM	#9 (permalink)
dansls1 Senior Member Join Date: May 2007 Location: Garden City, MI Posts: 764	I love otters, if you look at all the animals on the yamaha site there's an otter there is how I found it in the first place __________________ -Dan Gee Bee R1 - gremirmodels.com, Modelik BF109-G8 -> Complete Halinski Mustang III -> In progress

10-10-2007, 01:57 PM	#11 (permalink)
smyfe Senior Member Join Date: Dec 2006 Location: Stourbridge, West Midlands UK Posts: 232	A mere £209 on e-bay with free p+p in the UK, time to start saving the pennies I think

10-10-2007, 01:59 PM	#12 (permalink)
smyfe Senior Member Join Date: Dec 2006 Location: Stourbridge, West Midlands UK Posts: 232	If anyone is interested Craft Robo Vinyl / Die Cutter with 2 Year Warranty - eBay Die-Cutters Punches, Cardmaking Scrapbooking, Crafts (end time 11-Oct-07 19:36:23 BST)

10-10-2007, 02:21 PM	#13 (permalink)
MOS95B Senior Member Join Date: Feb 2007 Location: Robbinsdale MN USA Posts: 972	Wish I could afford that. (Translation: I wish I could talk The Missus into letting me get that) __________________ Yet another John..... I may not be as good as I once was But I'm as good once as I ever was surfduke's Moon Port Project - My builds

10-11-2007, 12:44 AM	#14 (permalink)
sakrison Senior Member Join Date: Jul 2006 Location: Ripon, Wisconsin USA -- 20 mi from Oshkosh Posts: 414	I don't know, maybe I should just hire somebody to build the models for me. Seriously, it doesn't appeal to me. Cutting out parts is part of the fun, part of the challenge, part of the relaxation of paper modeling. That's not to say my attitude is better or purer or more or less anything than anybody else's. It's just my opinion. For myself, I can't see spending $600 to eliminate what is for me part of the fun and the challenge. "Every dog to his own fleas." I'll pass on this one. No worries, --David __________________ sakrison@charter.net / www.ChasingtheGhostBirds.com "Imagination is more important than knowledge."- Albert Einstein Current Projects: RR Merlin 45 engine @ 1:16.5 scale and 1/72 U-Boat Type VII

10-11-2007, 12:50 AM	#15 (permalink)
yaniv Senior Member Join Date: Nov 2004 Posts: 1,337	its work with any kind of digital model? __________________ Visit my Site --> http://www.cm-contest.land.ru/ visit my project c-47 --> http://forum.zealot.com/t146945/ kooklik sub --> http://forum.zealot.com/t146581/?highlight=kooklik

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode