KpA3 255b - Renova Model - 1:25 - updates & redesigns - Page 4

had · 03-16-2008, 02:46 PM

Thanks Josef!

So, the main base of engine is done and now I can start with the small thinks. First will be propably the fuel divide mechanism.

It starts look like engien

bclemens · 03-17-2008, 11:35 PM

Had, You and Patero have brought a much higher level of craftsmanship to this forum. Thank you for joining and sharing things with us.

For example, you wrote:

Most of all what I know I learn from different foroums on internet, so it's abut searching, reading learning and experimenting...

It just came to my mind - try this - put paper to some strog spirit for about 10 -15min (I use technical spirit - 60 - 70%) and then tray to bend it, it will be very interesting - paper will be flexible like it was in water, but stay normaly strong...

It's very difficult for me explayn that corectly, but tray and you see...

After some training it's very good technick for making more plastic look for sides of simple wheels...

And I can't forgot - I learnt this from Losllanos (from Slovak forum)

Try and enjoy!

Yes- that is what learning this craft is about- try and enjoy! Please continue to post your work and please share with us as much as you like to share. I, for one, will be a very willing student.
Cheers!
Bruce

had · 03-18-2008, 06:00 PM

Thanks Bruce,

Even thought I do this model for my own pleasure, but some time is hard to continue in work, so it's always very encouraging read post like that your one.

Thanks.
Miro

had · 03-21-2008, 11:02 AM

I starts wihtn fuel divader. For now only main base.

had · 03-30-2008, 03:43 PM

back to some old stuff, I finised the tool box

had · 04-20-2008, 05:13 PM

I had too much duties in last tree week, but now I'm back and continue with fuel divider...

It's unfinished jet, but it was too quiet here

Enjoy!

had · 04-23-2008, 03:27 PM

Probably fuel regulator

timhinds1@cox.net · 04-26-2008, 12:22 PM

I think your attention to detail reminds me of when I was young. I don't have the dexterity and my eyes are not that good anymore. Yesterday I spent all day trying to build one roof for an archtectural model. The tops of the towers gave me fits.

So hats off to you. Enjoy it while you have it.

Very nice work. By the way how did you get the gas cans to look so real? Even the X indentations are there. Great job!

Tim

kenlwest · 05-23-2008, 07:00 AM

All I can say is WOW!

I can't believe the oil can, grease gun, wrenches and jack!

YOU ARE THE MASTER! Your work gives people like me a vision of what is possible in paper. Very inspiring.

THANK YOU!

Ken

had · 05-24-2008, 03:48 PM

Thanks a lot, I'm glad you like my work...
At this time is kraz on stend by (because of wedding preparations)...
But at least some progress

grzechu pl · 05-27-2008, 12:45 PM

I also have this one, its first renova model but looks great. Nice build Had, i wish you good luck

HeavyKevie · 05-31-2008, 01:03 PM

Quote:

Originally Posted by had

At this time is kraz on stend by (because of wedding preparations)...

Had,
Congratulations to you and your bride to be!

I wish you both nothing but the best... Cheeres!

...
So when is the big day anyway?

Kevin

had · 06-03-2008, 02:40 PM

Thanks Kevin,
It will be 21.6.2008

I finish second wheel

had · 06-09-2008, 03:36 PM

I've gog three whels now...
For changing a litle bit the work I decide to build this...
If somebody want to buil it, here is my upload

...
I decide add some other files, if here will be interest...

RapidShare: 1-Click Webhosting

had · 06-14-2008, 03:25 AM

New stearing wheel...

03-17-2008, 11:35 PM	#47 (permalink)
bclemens Senior Member Join Date: Jan 2008 Location: Springfield, Missouri Posts: 458	Had, You and Patero have brought a much higher level of craftsmanship to this forum. Thank you for joining and sharing things with us. For example, you wrote: Most of all what I know I learn from different foroums on internet, so it's abut searching, reading learning and experimenting... It just came to my mind - try this - put paper to some strog spirit for about 10 -15min (I use technical spirit - 60 - 70%) and then tray to bend it, it will be very interesting - paper will be flexible like it was in water, but stay normaly strong... It's very difficult for me explayn that corectly, but tray and you see... After some training it's very good technick for making more plastic look for sides of simple wheels... And I can't forgot - I learnt this from Losllanos (from Slovak forum) Try and enjoy! Yes- that is what learning this craft is about- try and enjoy! Please continue to post your work and please share with us as much as you like to share. I, for one, will be a very willing student. Cheers! Bruce __________________ New Laser Cut accessories for your models, Free 1/33 Tug for your Airplane at AvantCard.biz Get your free Card o' Nuts here http://forum.zealot.com/t160691/

04-20-2008, 05:13 PM	#51 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	I had too much duties in last tree week, but now I'm back and continue with fuel divider... It's unfinished jet, but it was too quiet here Enjoy! Last edited by had; 04-23-2008 at 03:30 PM.

04-26-2008, 12:22 PM	#53 (permalink)
timhinds1@cox.net Senior Member Join Date: Feb 2007 Location: San Diego, CA Posts: 506	I think your attention to detail reminds me of when I was young. I don't have the dexterity and my eyes are not that good anymore. Yesterday I spent all day trying to build one roof for an archtectural model. The tops of the towers gave me fits. So hats off to you. Enjoy it while you have it. Very nice work. By the way how did you get the gas cans to look so real? Even the X indentations are there. Great job! Tim __________________ The older I get the more I did. When life hands you a lemon, throw it back!

05-27-2008, 12:45 PM	#56 (permalink)
grzechu pl Junior Member Join Date: May 2008 Location: Warszawa/Polska Posts: 12	I also have this one, its first renova model but looks great. Nice build Had, i wish you good luck __________________ cheers, Grzesiek My building Simara Ace / JSC Ła-7 / WAK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-16-2008, 02:46 PM	#46 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	Thanks Josef! So, the main base of engine is done and now I can start with the small thinks. First will be propably the fuel divide mechanism. It starts look like engien

03-18-2008, 06:00 PM	#48 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	Thanks Bruce, Even thought I do this model for my own pleasure, but some time is hard to continue in work, so it's always very encouraging read post like that your one. Thanks. Miro

03-21-2008, 11:02 AM	#49 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	I starts wihtn fuel divader. For now only main base.

03-30-2008, 03:43 PM	#50 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	back to some old stuff, I finised the tool box

04-23-2008, 03:27 PM	#52 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	Probably fuel regulator

05-23-2008, 07:00 AM	#54 (permalink)
kenlwest Senior Member Join Date: Jul 2007 Posts: 225	All I can say is WOW! I can't believe the oil can, grease gun, wrenches and jack! YOU ARE THE MASTER! Your work gives people like me a vision of what is possible in paper. Very inspiring. THANK YOU! Ken

05-24-2008, 03:48 PM	#55 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	Thanks a lot, I'm glad you like my work... At this time is kraz on stend by (because of wedding preparations)... But at least some progress

06-03-2008, 02:40 PM	#58 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	Thanks Kevin, It will be 21.6.2008 I finish second wheel

06-09-2008, 03:36 PM	#59 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	I've gog three whels now... For changing a litle bit the work I decide to build this... If somebody want to buil it, here is my upload ... I decide add some other files, if here will be interest... RapidShare: 1-Click Webhosting

06-14-2008, 03:25 AM	#60 (permalink)
had Member Join Date: Jan 2008 Location: Slovakia (Hlohovec) Posts: 41	New stearing wheel...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kraz 255b 1:25 renova model	maybaygiay	Armor and Military Vehicles	17	06-04-2008 03:47 PM