Pre-dreadnaught era ships?

Odysseus · 03-26-2008, 12:32 PM

Does anyone have any plans to do any? In particular U.S.S. Iowa (1898 )and U.S.S. Brooklyn.

paperboy · 04-06-2008, 12:04 AM

I think that either Brooklyn or New York is at a french website go to Service historique de la Défense and look for plans de batiments.
If you type in Brooklyn or Iowa plans and other views for the ship will come up.

Hope this helps
Vernon

jkrenzer · 04-09-2008, 06:04 PM

What a fantastic plans site for French warships. However I did type in both Brooklyn and Iowa to no avail.

The prints are scanned in scale (1/100 and 1/200) and saved as TIF format. I have SPICER IMAGINATION at work and except for a few sets I have tried most seem to pop up. Be careful though, you have to set your scale to print properly and I have to print to Adobe before sending the file to our drafting plotter because the file sizes are too large.

Also since the plans are scanned into a computer from sheet drawings they have the usual ptoblems, rolls, tears, and poor alignment.

I would love to build a model from scratch of one of these someday soon.

JohnMGD · 04-19-2008, 01:37 PM

Hello,

Just go to the following address and type in the name BROOKLYN or IOWA into the red bar and click Rechercher !!! Good Luck.
Atlas du génie maritime

Greatings

John.

03-26-2008, 12:32 PM	#1 (permalink)
Odysseus Junior Member Join Date: Dec 2007 Posts: 11	Pre-dreadnaught era ships? Does anyone have any plans to do any? In particular U.S.S. Iowa (1898 )and U.S.S. Brooklyn.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sci fi ships	cylon11	Science Fiction Models	2	07-16-2007 12:58 PM
Star Wars Dreadnaught	Dyna-Soar	Internet Finds	0	04-18-2006 08:31 PM
HO Scale Ships	Nick8564	HO Scale Model Trains	0	10-06-2004 10:08 AM
Ships' Lifeboats	Maurice	Ship & Watercraft Models	4	04-26-2004 07:15 PM
Ships rails: how are they done?	jyduchene	Card Modeling	5	02-18-2004 05:56 PM

04-06-2008, 12:04 AM	#2 (permalink)
paperboy Member Join Date: Feb 2005 Location: South Carolina Posts: 65	I think that either Brooklyn or New York is at a french website go to Service historique de la Défense and look for plans de batiments. If you type in Brooklyn or Iowa plans and other views for the ship will come up. Hope this helps Vernon

04-09-2008, 06:04 PM	#3 (permalink)
jkrenzer Member Join Date: Oct 2007 Posts: 60	What a fantastic plans site for French warships. However I did type in both Brooklyn and Iowa to no avail. The prints are scanned in scale (1/100 and 1/200) and saved as TIF format. I have SPICER IMAGINATION at work and except for a few sets I have tried most seem to pop up. Be careful though, you have to set your scale to print properly and I have to print to Adobe before sending the file to our drafting plotter because the file sizes are too large. Also since the plans are scanned into a computer from sheet drawings they have the usual ptoblems, rolls, tears, and poor alignment. I would love to build a model from scratch of one of these someday soon.

04-19-2008, 01:37 PM	#4 (permalink)
JohnMGD Member Join Date: Sep 2005 Posts: 46	Hello, Just go to the following address and type in the name BROOKLYN or IOWA into the red bar and click Rechercher !!! Good Luck. Atlas du génie maritime Greatings John.