fiesler fi-103 reichenburg

col. kurtz · 05-06-2008, 02:08 PM

ive just finished mareks fi-103 in 1:50 scale heres some photos of the bird hope you guys like

Krzychu74 · 05-06-2008, 02:22 PM

Hello!
Very nice!

Best regards.
Krzychu74

**cgutzmer** · 05-06-2008, 05:26 PM

Nice clean build there! My son would have a blast with it

Chris

col. kurtz · 05-06-2008, 05:35 PM

thanks guys

cdavenport · 05-12-2008, 01:43 PM

That's sweet! Have you seen the V-1 at Currell's site? I built that one and it was a good build, too.

col. kurtz · 05-12-2008, 05:13 PM

yer thats one of my next projects but im gonna scale it up so i can fly it as a glider as i have a nice big park with a nice 46 degree hill i can fly it form

cdavenport · 05-13-2008, 09:35 AM

What are your intentions for flight? Powered or not? Seems to me that this would be ideal for Jet-X power. Will you make a balsa model? I sure would like to see that fly! I hope things are going well for you in "jolly ole England!" My favorite place on the planet is an English pub.

col. kurtz · 05-13-2008, 01:54 PM

BALSA FORMERS WITH PAPER COVERING COLOUR PRTS PRINTED ON 80SQ/GM PAPER TO KEEP THE WEIGHT DOWN.DONT KNOW ABOUT THE ENGINE I COULD GET FINED FOR USING IT IN A PARK MY LOCAL COUNCILS FUNNY BOUT THAT.

ENGLISH PUBS ARE GOOD.IF YOU PLAN ON COMING OVER TO THE U.K LET ME KNOW AND ILL BUY YOU A GOOD ENGLISH ALE

cdavenport · 05-14-2008, 03:46 PM

Now, that is an offer too good to refuse! Cheers, mate!

05-06-2008, 02:22 PM	#2 (permalink)
Krzychu74 Senior Member Join Date: Jan 2007 Location: Klodzko. Poland Posts: 112	Hello! Very nice! Best regards. Krzychu74 __________________ My webside: www.mikromodele.cba.pl

05-06-2008, 05:26 PM	#3 (permalink)
cgutzmer Reserves Librarian Card Models Administrator Join Date: May 2006 Location: Sun Prairie WI Posts: 4,634	Nice clean build there! My son would have a blast with it Chris __________________ Looking for models - try the Zealot WIKI! Click here -> http://wiki.zealot.com/index.php/Free_Models

05-12-2008, 01:43 PM	#5 (permalink)
cdavenport Senior Member Join Date: Sep 2006 Location: Athens,Georgia Posts: 313	That's sweet! Have you seen the V-1 at Currell's site? I built that one and it was a good build, too. __________________ Major CT Davenport, USAF, (Ret) Teacher, Carver Middle School

05-13-2008, 09:35 AM	#7 (permalink)
cdavenport Senior Member Join Date: Sep 2006 Location: Athens,Georgia Posts: 313	What are your intentions for flight? Powered or not? Seems to me that this would be ideal for Jet-X power. Will you make a balsa model? I sure would like to see that fly! I hope things are going well for you in "jolly ole England!" My favorite place on the planet is an English pub. __________________ Major CT Davenport, USAF, (Ret) Teacher, Carver Middle School

05-14-2008, 03:46 PM	#9 (permalink)
cdavenport Senior Member Join Date: Sep 2006 Location: Athens,Georgia Posts: 313	Now, that is an offer too good to refuse! Cheers, mate! __________________ Major CT Davenport, USAF, (Ret) Teacher, Carver Middle School

05-06-2008, 05:35 PM	#4 (permalink)
col. kurtz Senior Member Join Date: Sep 2007 Location: basildon,essex u.k Posts: 406	thanks guys

05-12-2008, 05:13 PM	#6 (permalink)
col. kurtz Senior Member Join Date: Sep 2007 Location: basildon,essex u.k Posts: 406	yer thats one of my next projects but im gonna scale it up so i can fly it as a glider as i have a nice big park with a nice 46 degree hill i can fly it form

05-13-2008, 01:54 PM	#8 (permalink)
col. kurtz Senior Member Join Date: Sep 2007 Location: basildon,essex u.k Posts: 406	BALSA FORMERS WITH PAPER COVERING COLOUR PRTS PRINTED ON 80SQ/GM PAPER TO KEEP THE WEIGHT DOWN.DONT KNOW ABOUT THE ENGINE I COULD GET FINED FOR USING IT IN A PARK MY LOCAL COUNCILS FUNNY BOUT THAT. ENGLISH PUBS ARE GOOD.IF YOU PLAN ON COMING OVER TO THE U.K LET ME KNOW AND ILL BUY YOU A GOOD ENGLISH ALE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Fiesler Storch by GPM	Leif Oh	First Impressions Kit Reviews	12	05-25-2005 10:24 PM
Laser-cut formers in Fiesler Storch and BE2e from GPM!	Leif Oh	Internet Stores and vendors	2	04-27-2005 03:00 PM