Build thread:Canon EOS Kiss Digital

[imavingalaughaswell]

After my first attempt at a camera build,thread here Canon AE-1 Build
Time for my second canon camera build..

Going to add a lot more photos this time to make it more interesting to look at

Just printing the pages of now ready to start..

Forgot to add this..

I'm using what is labled as "250 gsm" card for the build..

not sure what the converts to?

To Be Continued

[imavingalaughaswell]

OK here we go.

The Canon EOS Kiss Digital is available in two colors Black and Grey,I have chosen the Grey one because the print quality was better on my printer.

This time i have decided to take a lot more photos of the build..

First is part 1:- Cut out rough


Then cut properly:-


Before the next step i went around ALL the edges with a grey felt tip pen

Then folded:-


I then went around any exposed edges after folding with the grey felt tip pen

On to part 2:- Cut out rough


Then cut properly:-


Before the next step i went around ALL the edges with a grey felt tip pen

Then folded:-


Felt tip time again!

Join part 1 to part 2:-


Again felt tip time
*NOTE* Parts 1 and 2 now become part A

One to part 3:- Cut out rough



Then cut properly:-


Again felt tip time.

To be continued.....

[imavingalaughaswell]

time for an update,As i said in first post ,lots of photos!!

Part 3 folded:-


Felt tip time!

On to part 4,cut rough:-


Then cut properly:-


Felt tip time

Then folded:-


Felt tip time

Join part 3 to part 4:-


On to part 5,cut rough:-


Then cut properly:-


Then folded:-


On to part 6,cut rough:-


Then properly:-


Then folded:-


Join part 5 to part 6:-


Onto part 7,cut rough:-


Then properly:-


Then folded:-


Join parts 5/6 to part 7:-


Onto part 8,cut rough:-


Then properly:-


Then folded:-



To be continued...

[imavingalaughaswell]

Another update....

Join parts 5/6/7 to part 8:-


On to part 9,cut rough:-


then cut properly:-


Then folded:-


Join parts 5/6/7/8 to part 9:-


Join parts 3/4 to parts 5/6/7/8/9:-


This then becomes Part B

Onto part 10,cut rough:-


Then properly:-


Then folded:-


Onto part 11,cut rough:-


Then properly:-


Then folded:-


Join part 10 to part 11:-


Onto part 12,cut rough:-


Then properly:-


Then folded:-


Join parts 10/11 to part 12:-


Onto part 13,cut rough:-


Then properly:-


Then folded:-


Join parts 10/11/12 to part 13:-


Onto part 14,cut rough:-


Then properly:-


Then folded:-


Join parts 10/11/12/13 to part 14:-


Onto part 15,cut rough:-


Then properly:-


Then folded:-


Join parts 10/11/12/13/14 to part 15:-


This becomes part C


To be continued....

[CJTK1701]

Sorry, I saw Kiss and thought you were going to build the Demon from KISS!

You're building a paper camera? Looks good so far, very clean.

[imavingalaughaswell]

Okies and so it continues.....

Onto part 16,cut rough:-


Then properly:-


Then folded:-


Onto part 17, cut rough:-


Then properly:-


Then folded:-


Join part 16 to part 17:-


Onto part 18, cut rough:-


Then properly:-


Then folded(Has to be made to final shape in next step):-


Join part 16/17 to part 18:-


Onto part 19, cut rough:-


Then properly:-


Then folded:-


Onto part 20, cut rough:-


Then properly:-


Then folded:-


Onto part 21 (2 Needed), cut rough:-


Then properly:-


Then folded:-


Onto part 22 (4 printed,but only 2 needed due to thicknes of card used),cut rough:-


Then properly:-


Join part 21 to 22 (do 2 times):-


Onto part 23 (2 needed), cut rough:-


Then properly:-


Then folded (same as part 21):-


Join parts 21/22 to part 23 (2 needed):-


Onto part 24 (2 needed), cut rough:-


Then properly:-


Join part 24 to the bottom of parts 21/22/23:-


*Note* there should now be 2 of the above assemblies.

Join part 21/22/23/24 to part 19:-


Join parts 21/22/23/24 to part 20:-


Join parts 19/21/22/23/24 to part B:-


Join parts 20/21/22/23/24 to part C:-


Join part B to part A:-



To be continued......

[imavingalaughaswell]

Another update...

Join part D to parts A/C:-


Another view:-


Join Part B to parts A/C/D:-


This now becomes part E

Onto part 25, cut rough:-


Then properly:-


Then folded:-


Join part 25 to part E:-


Another view:-


This now becomes part F,and completes the basic shape..

Onto part 26, cut rough:-



To be continued......